Industrial Engineers/Mechanical Engineers/ Production or Plant Engineers Thread (ANZSCO 233513)

1434445464749»

Comments

  • jakibantilesjakibantiles SingaporePosts: 193Member

    Hello po. Makakapag apply pa po ba tayong mga ME ng state sponsorship pag offshore at walang at least 1yr experience sa kahit AU? Parang halos lahat ng state may additional requirements at di magqqualify for 491/190. Any thoughts po?

    ANZSCO 233512 | Mechanical Engineer | Age: 30, Education: 15, Work Experience: 10, PTE: 20, Spouse: 10, CCL: 5 |

    Lodged EOI | 189/90 Points | DOE: 08 June 2020

    Lodged Visa 482 | 17 Mar 2020 | Granted 24 Sep 2020 while Offshore

    Travel Exemption | DOA: 08 Oct 2020 | Approved: 12 Oct 2020

  • jun_als89jun_als89 Posts: 2Member

    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

  • anna_manna_m Quezon CityPosts: 48Member

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi I am not familiar with your case but you may want to check the latest guidelines released by Engineer Australia they might have guidance on your case. Or FAQs page. Better to get info directly from them. You might want to check other threads regarding skills assessment na similar ng case mo.

  • toyotafxtoyotafx Posts: 26Member

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi Sir,

    I am doing the same thing, manufacturing engineering graduate, most of my experience in Supply Chain. I aligned my Summary Statement/CDR on the ANZSCO description of Production Engineer. Based on what i read on the EA MSA manual, it should be okay as long as the competency elements of either PE, ET or EA are met and justified properly, supported by proper documentation.

    I'm just waiting for the COE from an employer before I submit, will let you know how it turns out!

    133512 offshore | 190 - 75 pts | Age - 25 | English - 20 | Qualifications - 15 | State - 5 | Partner - 5 | CCL - 5
    233513 offshore | 189 - 85 pts | 190 - 90 | Age - 25 | English - 20 | Qualifications - 15 | Work Experience (outside) - 10 | State - 5 | Partner - 10 | CCL - 5

    15.08.20 - started researching. identified which ANZSCO occupation I should have assessed
    22.08.20 - consultation with VETASSESS consultant on my nominated ANZSCO occupation
    01.09.20 - took IELTS test
    07.09.20 - results came out, proficient only
    07.09.20 - submitted 133512 assessment requirements to VETASSESS
    08.09.20 - started drafting CDR for EA assessment for 233511
    18.09.20 - positive outcome of VETASSESS assessment (although most of my work experience was not credited)
    24.09.20 - took PTE. superior outcome
    01.10.20 - submitted application to EA for 233511
    07.10.20 - submitted application to ACS for partner's skills assessment
    13.10.20 - received positive outcome from EA for 233513
    17.10.20 - partner's english test. PTE proficient
    17.10.20 - EOI lodged. 133512 - 190 @ 70 pts
    17.10.20 - EOI lodged. 233513 - 189 @ 75 pts, 190 @ 80 pts
    11.10.20 - positive outcome for partner's skills assessment +5 points. 189 and 190 for 233513 increased to 80 and 85, respectively
    24.11.20 - CCL test
    01.12.20 - passed CCL test. 189 and 190 @ 85 & 90 pts, respectively, for 233513. 190 @ 75pts for 133512

  • GrifterGrifter Posts: 440Member
    @jun_als89 hello. Gamitin nyo po kung saan mas match/ mas matagal yung experience nyo as per anzsco. Kung san kayo makakakuha ng higher points.

    I had an officemate po, EE graduate pero nagpa assess as IE kase mas IE related ang work nya, nakalusot naman po sa EA. That was 2018.

    All the best!
  • jax2016jax2016 Posts: 2Member

    Hello good PM sa lahat.
    Newbee ako sa site.This month lng ako ng pa member.BSME po ako at sa ngayon ngtatrabaho as Mechanical Design Engineer. 12+ years na ako sa company.Sa ngayon ko lng npag isipan na mgtry abroad.Hindi ako ng attempt mag apply dati kasi mga nearly 6 years ako pinapadala ng company sa Singapore at Japan. Nabasa ko po did2 sa forum mga procedure for application para sa Mechanical Engineer.pwede po mg ask ano po ba mga documents na ihanda para maisa ayos ang pagkakasunod basi sa latest na requirement.Then any suggested agency that is good on my field of work. Thanks in advice..

  • anna_manna_m Quezon CityPosts: 48Member

    @jax2016 said:
    Hello good PM sa lahat.
    Newbee ako sa site.This month lng ako ng pa member.BSME po ako at sa ngayon ngtatrabaho as Mechanical Design Engineer. 12+ years na ako sa company.Sa ngayon ko lng npag isipan na mgtry abroad.Hindi ako ng attempt mag apply dati kasi mga nearly 6 years ako pinapadala ng company sa Singapore at Japan. Nabasa ko po did2 sa forum mga procedure for application para sa Mechanical Engineer.pwede po mg ask ano po ba mga documents na ihanda para maisa ayos ang pagkakasunod basi sa latest na requirement.Then any suggested agency that is good on my field of work. Thanks in advice..

    Congrats for having decided to migrate to Australia. First off, please check with Engineers Australia website for their latest guidelines. Baka kasi may mga nag-iba na. For starters, alam ko po kelangan nyo proof of full-time paid employment. Pa check n lng po ano po specific n kelangan. Most people po ata ay pay slip or ITR prinoprovide. Good luck din po.

  • jax2016jax2016 Posts: 2Member

    @anna_m said:

    @jax2016 said:
    Hello good PM sa lahat.
    Newbee ako sa site.This month lng ako ng pa member.BSME po ako at sa ngayon ngtatrabaho as Mechanical Design Engineer. 12+ years na ako sa company.Sa ngayon ko lng npag isipan na mgtry abroad.Hindi ako ng attempt mag apply dati kasi mga nearly 6 years ako pinapadala ng company sa Singapore at Japan. Nabasa ko po did2 sa forum mga procedure for application para sa Mechanical Engineer.pwede po mg ask ano po ba mga documents na ihanda para maisa ayos ang pagkakasunod basi sa latest na requirement.Then any suggested agency that is good on my field of work. Thanks in advice..

    Congrats for having decided to migrate to Australia. First off, please check with Engineers Australia website for their latest guidelines. Baka kasi may mga nag-iba na. For starters, alam ko po kelangan nyo proof of full-time paid employment. Pa check n lng po ano po specific n kelangan. Most people po ata ay pay slip or ITR prinoprovide. Good luck din po.

    Salaman Ms. Anna..
    Any with sample CDR for Oil and Gas na experience for Mechanical Engineer.?
    [email protected]
    Thanks in Advance

  • ericson29ericson29 Posts: 9Member

    Hi po tatanong ko long po graduate po kasi ako ng EE and etong last job ko of 5 years is as a production engineer though yung product is pang electrical san po kaya sya pasok. Di naman po ako kasama sa nagdedesign nagsusupervise po ako ng assembly tsaka wiring ng mga switchgears. Salamat po sa sasgot

  • toyotafxtoyotafx Posts: 26Member

    @toyotafx said:

    @jun_als89 said:
    Hello po sa lahat!
    Registered ECE po ako sa pinas but in shipbuilding experience specifically in painting department (malayong-malayo sa profession). I plan to apply for Industrial or Production Engineer in EA (since it has the closest in description to my work). Tama po ba ginagawa ko na ibase ang CDR writing and Summary Statement sa Industrial Engineer or Production Engineer and not as an ECE?
    Thanks in advance!

    Hi Sir,

    I am doing the same thing, manufacturing engineering graduate, most of my experience in Supply Chain. I aligned my Summary Statement/CDR on the ANZSCO description of Production Engineer. Based on what i read on the EA MSA manual, it should be okay as long as the competency elements of either PE, ET or EA are met and justified properly, supported by proper documentation.

    I'm just waiting for the COE from an employer before I submit, will let you know how it turns out!

    Hi @jun_als89. Just got my assessment from EA, came out positive and they recognized all of my relevant employment which is what I was hoping for. Here's a brief personal background and what I did.

    • Manufacturing Engineering and Management qualification
    • Employment for the past X years primarily in supply chain across several companies
    • I submitted my CDR which was aligned to industrial engineering (mali pala nabanggit ko sa taas), but was assessed as a production engineer
    • I got notified to submit additional documents from my first employment but was not able to provide specifically what they asked for. I opted to submit all of the documents that I have of my first employment, regardless if it wasn't in the list of qualified documents by EA.
    • Got a positive assessment as a Production Engineer, not Industrial Engineer, even if my background was in Supply Chain. I can only attribute this to how I drafted my CDR.

    Overall, based from my experience, EA assesses your qualifications based on:
    1. Quality of your CDR - make sure you don't copy or use someone else's CDR. there are a lot of materials on the internet to help you guide with your CE creation
    2. Your qualifications - it should be at the very least, aligned with your target qualification, if in case your CDR does not cut it
    3. CPD - i didn't put a lot of info, only a handful of seminars i've attended
    4. documents - luckily, i was studious enough to keep all of my 2316s and I just downloaded my SSS contribution and employment background in the portal. COEs are easy enough to get, as still maintain contact with my past employers.

    I hope this helps!

    133512 offshore | 190 - 75 pts | Age - 25 | English - 20 | Qualifications - 15 | State - 5 | Partner - 5 | CCL - 5
    233513 offshore | 189 - 85 pts | 190 - 90 | Age - 25 | English - 20 | Qualifications - 15 | Work Experience (outside) - 10 | State - 5 | Partner - 10 | CCL - 5

    15.08.20 - started researching. identified which ANZSCO occupation I should have assessed
    22.08.20 - consultation with VETASSESS consultant on my nominated ANZSCO occupation
    01.09.20 - took IELTS test
    07.09.20 - results came out, proficient only
    07.09.20 - submitted 133512 assessment requirements to VETASSESS
    08.09.20 - started drafting CDR for EA assessment for 233511
    18.09.20 - positive outcome of VETASSESS assessment (although most of my work experience was not credited)
    24.09.20 - took PTE. superior outcome
    01.10.20 - submitted application to EA for 233511
    07.10.20 - submitted application to ACS for partner's skills assessment
    13.10.20 - received positive outcome from EA for 233513
    17.10.20 - partner's english test. PTE proficient
    17.10.20 - EOI lodged. 133512 - 190 @ 70 pts
    17.10.20 - EOI lodged. 233513 - 189 @ 75 pts, 190 @ 80 pts
    11.10.20 - positive outcome for partner's skills assessment +5 points. 189 and 190 for 233513 increased to 80 and 85, respectively
    24.11.20 - CCL test
    01.12.20 - passed CCL test. 189 and 190 @ 85 & 90 pts, respectively, for 233513. 190 @ 75pts for 133512

Sign In or Register to comment.

Welcome to Pinoy AU Community!

The longest running Pinoy-Australian Forum site in the history. We are connecting Pinoys "in" and "to" Australia since 2010! If you want to join in, click one of these buttons!

Categories

Random Members
(42121)

jessmarc93alenapolspTManOfficialMadzfatimatorrescarymlatPherdslaine2xnhelle20xtiannaitxbiangchang25pibs_1522Anne EguiaVinodmagarnit@sirkjasmine102785tessmelenyochingyMDK-GAB
Browse Members

Members Online (15) + Guest (113)

AdminHunter_08engr_boyfgsatonibayMumVengcyborg5extremestylemanJohnPatrickazaleacardelclimmissbeetyrant008VLADinADjldejesus0817

Top Active Contributors

Top Posters